TrueBlend™ High Heat

TrueBlend™ High Heat
Gravimetric Batch Blenders

TrueBlend high-temperature models allow processors running engineering plastics like ABS, nylon, polycarbonate and PET to blend these resins after they have been dried.

Until now, processors had to blend the material before drying, but by doing so ran the risk that some ingredients could separate out of the mix during the drying and conveying process.

Like all TrueBlend models, the new high-heat blenders feature a fully enclosed cabinet design assuring no pellet spillage and clean operation. Standard convenience features, such as wide access doors on each component bin, a hinged chassis access door and removable components in the mixing chamber reduce material waste and downtime during clean out.

 

    • Blend accuracy to 1/2 of 1%
    • Easy-to-use control
    • Convenient, no-tools clean out
    • A package to fit your needs

 

  1. Downloads
  2. Videos
  3. Contact Us

Contact Us Form

Click here

email

salesindia@conairgroup.com

Phone

+91 79 2909 4790, 2970 8147

Parts & Service

+91-8000788040

serviceindia@conairgroup.com

Features (click here to hide)

TBA Models

Safety disconnect relocated to the outside of the door

High temperature air cylinders and hosing

High temperature load cells

Standoff to isolate power box from chassis

 

 

TBH Models

Safety disconnect relocated to the outside of the door

High temperature air cylinders and hosing

High temperature load cells

High temperature level sensor

Standoff to isolate power box from chassis

High temperature glass-tempered sight glasses

Each access door opening has high temperature glass-tempered sight glasses

Each access door opening has two round heat-treated sight glasses

Options (click here to hide)

Dry air blanket

Drain chute

Minor component flow restrictor

Major component flow restrictor

Air blow-off for mix chamber level sensor

Remote mixer demand sensor

Material level alarm control

Specifications (click here to hide)
Model TBA/TBH 100
Side View Front View
Top View Control

 

TBA/TBH250 - TBA/TBH900
Side View Front View
Top View TBA/TBH250-500 Top View TBA/TBH900
Control  
 
MODELS TBA/TBH100 TBA/TBH250 TBA/TBH500 TBA/TBH900
Performance characteristics
Batch size lbs {g} 2.2 {1000} 5.5 {2500} 11 {5000} 19.8 {9000}
Maximum throughput lbs/hr {kg/hr}  400 {181} 950 {431} 1500 {680} 3500 {1588}
Bin capacity - main ingredient ft³ {liter} 0.6 {17} 1.6 {45.3} 2.7 {76.4} 4.4 {124.6}
Bin capacity - minor ingredient ft³ {liter} 0.3 {8} 1.6 {45.3} 2.7 {76.4} 4.4 {124.6}
Maximum number of materials 4 4 4 4
Number of vertical discharge valves 4 4 4 4
Number of major bin valves 2 - (60 mm) 2 - (60 mm) 2 - (100/60 mm) 2 - (100 mm)
Number of minor bin valves 2 - (20 mm) 2 - (30 mm) 2 - (30 mm) 2 - (60 mm)
Dimensions inches {mm}
A - Height above mounting plate 45.25 {1149} 57.50 {1461} 63.00 {1600} 74.75 {1896}
B - Width 30.25 {769} 36.50 {926} 40.13 {1026} 48.5 {1229}
C - Depth 32.75 {844} 40.83 {1037} 43.00 {1092} 51.00 {1296}
D - Controller height 6.50 {165.1} 6.50 {165.1} 6.50 {165.1} 6.50 {165.1}
E - Controller width 8.75 {222.3} 8.75 {222.3} 8.75 {222.3} 8.75 {222.3}
F - Controller depth 6.75 {171.5} 6.75 {171.5} 6.75 {171.5} 6.75 {171.5}
Weight lbs {kg}
Installed  160 {72} 320 {145} 400 {182} 550 {249}
Shipping  270 {122} 440 {120} 520 {236} 700 {318}
Voltage total amps    
115V/1 phase/60 Hz 3.0 6.3 6.3 6.3
230V/1 phase/50 Hz 1.5 3.2 3.2 3.2
Compressed air requirements
Discharge valves 90 psi @ 0.2 ft³ {6 bars @ 0.09 liters/sec}, 1/4 inch NPT fitting
Maximum loader sizes    
20 inch loaders - number of loaders NA NA NA 4
15 inch loaders - number of loaders NA 4 4 NA
12 inch loaders - number of loaders 2 NA NA NA
8 inch loaders - number of loaders 2 NA NA NA